Achieving high quality results starts with careful sample preparation including efficient and reproducible sample homogenization. The SpeedMill PLUS meets these requirements and forms the foundation for your successful analysis.

Maximum Access. Minimum Effort.

The homogenization process by SpeedMill PLUS is based on an innovative double action technology - a mechanical principle for which a patent has been filed. This new process allows users to operate the SpeedMill PLUS continuously if necessary, whereby efficient sample cooling is facilitated by the holder, which can be stored at down to -80 °C. The compact design, intuitive use interface and availablity of pre-defined protocols are decisive for the ease of use.

SpeedMill PLUS - Homogenizer of Choice

The SpeedMill PLUS is a highly efficient homogenization system for various starting materials used for the subsequent isolation and purification of DNA, RNA or proteins. The homogenization process is based on an innovative mechanical principle for which a patent has been filed. This new process allows users to operate the SpeedMill PLUS continuously if necessary. The high efficiency of energy input into the sample, based on a vertical movement, procures a homogeneous disruption of the sample without destroying the target molecules.

Efficient sample cooling: prior, during and after preparation

For the optimized sample holder, which is used inside the SpeedMill PLUS, different temperature ratings are freely selectable due to the storage down to –80 °C. According to this an efficient sample cooling during the whole homogenization process is warranted and the substantial sample warming that occurs with other homogenizers is prevented. The often problematic handling of liquid nitrogen or dry ice is thus a thing of the past. Additionally the considerably expense factor of this additives, which have to be loaded continuously, is not applicable. Besides the sample holder allows an easy transport of the sample tubes and a long term storage of starting or homogenized material at adequate temperatures.

Modern preparation of samples: SpeedMill PLUS

The samples to be processed are rapidly and efficiently homogenized in Lysis Tubes that have been specially optimized for the system and, as such, contain different and/or application-specific beads. Using beads makes it possible to completely and reproducibly homogenize even the toughest starting materials, such as cartilage and chitin shells of insects or ticks within a very short time. 2.0 ml and 0.5 ml containers (Lysis Tubes) with different beads are available for sample preparation, allowing users to adapt sample processing to a diverse range of soft and hard starting materials. Operating processes, such as loading and removing of the sample tubes, are very simple and no tools are required. In addition userdefined protocols can be entered and saved as well as pre-installed programs are available. Homogenization parameters, like time and using cyclic routines are freely selectable.

Innovative technology for outstanding results

Digestion using SpeedMill PLUS is based on an innovative, patented mechanical principle and ensures highly efficient energy input. Based on a vertical movement, the process also ensures that the samples are homogeneously digested without destroying the target molecules.

Analytik Jena
SpeedMill PLUS

Entire and reproducible homogenizing of up to 20 samples

Efficient sample cooling during the whole preparation without need for cost-intensive consumables

Flexible homogenizing system for various starting materials

Innovative double action technology

Passive sample cooling to -80°C

Pre-defined protocols

No acceleration/deceleration times

Compact design and minimal footprint

Need Assistance?

Contact us for expert advice for your needs and budget.

Products

SpeedMill PLUS 110 V
SpeedMill PLUS 110 V
The SpeedMill PLUS is a highly efficient homogenization system for various starting materials used for the subsequent isolation and purification of DNA, RNA or proteins.
SpeedMill PLUS 230 V
SpeedMill PLUS 230 V
The SpeedMill PLUS is a highly efficient homogenization system for various starting materials used for the subsequent isolation and purification of DNA, RNA or proteins.

TECHNICAL SPECIFICATIONS

Homogenization time

Programmable homogenization step

Number of cycles

Protocol steps

Storable protocols

Sample cooling

Steps of adjusting time

Pre-programmed protocols

User-defined protocols

Sample capacity

Acceleration time

Deceleration time

Homogenization routines

Device handling

Sample handling

SpeedMill PLUS 110 V
845-00007-4

30 sec to 4 min (depending on the starting material) 1 sec to 4:59 min 1-99 1-6 20 Passive cooled sample holder
storage at temperatures down to –80 °C
1 s Yes Yes Up to 20 samples simultaneously No acceleration No deceleration User-defined programming with user-defined parameters, pre-programmed protocols Stand-alone device, simple starting and handling of device by using modern touch sensors Simple sample tube loading and removal

SpeedMill PLUS 230 V
845-00007-2

30 sec to 4 min (depending on the starting material) 1 sec to 4:59 min 1-99 1-6 20 Passive cooled sample holder
storage at temperatures down to –80 °C
1 s Yes Yes Up to 20 samples simultaneously No acceleration No deceleration User-defined programming with user-defined parameters, pre-programmed protocols Stand-alone device, simple starting and handling of device by using modern touch sensors Simple sample tube loading and removal
Review
Average Rating: 0.0
0 Peoples have reviewed this product

Ease of use
After sales service
Value for money

More Products